How to Connect Wii U to Laptop

The Wii U has quite a bit of connectivity options, not the least of which is Wi-Fi.

As stated earlier, there is no step in offical to step guide to connect the system to a laptop. However, you can setup the laptop as a Wii U screen and connect the gamepad to the laptop’s controllers via wireless.

This sounds tedious , but it’s actually very easy. All you’ll have to do is install and run Nintendo’s Wii U DKRP software program.

Once it is installed, connect it to the laptop’s USB port and then run the program. Wii U DKRP will detect the “new” console and configure it.

How to Connect Wii U to Laptop

You’ll need an HDMI input connector if your laptop does not have one built in.

If any of your computer peripherals, like your mouse or keyboard, are also USB-connected, you will need a USB cable to connect the peripherals to your laptop. For most laptops, a USB port is around the back of the laptop or underneath.

Look for a port with the letters “USB” on it.

If you are having trouble finding one, try looking under one of the computer’s fans. If your computer’s fan is spinning backwards, then the Wii U is beginning make a connection between it and the laptop.

The bad news is that when the Wii U is plugged into your HDTV (it’s a Wii U-to-HDMI connection), it won’t display anything.

The only laptops with HDMI can be used to connect the Wii U by using an HDMI cable. The laptops have HDMI adapters that hook into the Wii’s controllers.

There is nothing to an output connector.

In your case, the Wii-to-laptop connector is HDMI. So, you will need an HDMI cable to connect your Wii U and your laptop.

But, the picture is not perfect yet. Your laptop will not support an HDMI connection.

It has to support an HDCP handshake and render full HD signals. Some laptops have outputs you can use, but the cheapest laptops you can find do not have an HDCP connector.

Unfortunately, you won’t be able to utilize hDMI and a laptop at the same time.

You’ll need to use an adapter to connect your laptop instead of the Wii U, and you’ll need to remove the connection from the Wii U. You’ll also want to dim your Wii U’s screen.

Since your laptop’s screen is much brighter than the Wii U’s, you’ll have to lower the Wii U’s brightness to make it easier to see.

You may still need to buy an HDMI cable, and you’ll get much faster results if you buy one.

Let’s get started.

How to Connects Wii U to the Laptop With HDMI

You can use an HDMI input port to connect the laptop to the Wii console.

The fact that the Wii U has a USB port is very convenient.

However, it’s not quite fast enough for a video display. For this scenario, it’s best to use a USB to HDMI adapter.

The adapter connects the Wii U’s USB port to your laptop’s HDMI port. 99 percent of laptops only have an HDMI output.

This is a major disadvantage, as the HDMI cable is quite expensive and may also affect your gaming experience.

Alienware laptops are the only laptops with HDMI inputs.

There is no link between the outputs of the laptop and the inputs of the console without an external device.

The most common USB devices used for this purpose are USB-HDMI, HDMI-DVI, and HDMI-VGA adapters, which have a plethora of choices.

As a consequence, unless your laptop has HDMI inputs, you cannot connect your laptop to the TV.

There is, however, a method of channeling the connection to your laptop.

This method is two-fold. The simplest way of doing this is by directly connecting the HDMI output of your laptop (or your Wii U) to the HDMI input of the Wii.

The other method revolves around having an extra cable and passing the original HDMI cable through it.

Connecting Wii to a Laptop Wirelessly

You can only connect your wii to your laptop now.

You can perform other things that you normally do online, such as checking your email, browsing the web, and streaming audio and video.

Remember that you have to use a mouse or a game controller to navigate the Channel Menu and work with your laptop.

After turning on your system and navigating to the channel Menu via a remote, press the button on the remote that says Wii.

A keystroke is required after turning on the Wii system and navigating to the Channel Menu via the remote. Then take the following steps: System Preferences > wi-Fi > Advanced and select “Internet over Wii LAN” under Connection Option.

The next step is to find your connection,and then you need to input your password for your Wi-Fi.

It’s finished !

If asked, save your changes .

How to Connect the Wiimote to the Laptop With Bluetooth Driver

It’s also possible that you’ll need a bluetooth dongle to eliminate any Bluetooth issues.

I’d like to clear up this confusion by presenting you with an instructional guide.

Here are the step you can follow:

• Right, In the bottom right corner, you will see the symbols for Bluetooth, WiFi, and LAN. Select the Bluetooth symbol. It will change to a yellow-green symbol. If your device is not detected, select “Scan for Devices.” If you have already set up your Bluetooth device with your laptop, you may skip this step. After you have successfully detected your Bluetooth device, you will see the symbol change to blue. If your device is successfully detected, select the blue symbol to connect to it.
• On the Wiimote, press 1 and 2 simultaneously. This will turn on the controller, and you should now find it listed in the available devices.
• The device list should also show its wireless name, “Nintendo RVL-CNT-01.”
• Pick Next and select Nintendo RVL-CNT-01 from the list of devices.
• When the WiiMote stops flashing, the bluetooth icon should change to green.
• Every few seconds, the buttons must be pushed.
• After that, choose the WiiMote from the list of available devices.
• You did it successfully if you signaled a connection to the Bluetooth symbol.
• Now you can use all of the WiiMote’s features on your computer or laptop.

How to Connect Your Wii U Gamepad to Your Laptop With the Easy Way

You can attach the Wii U gamepad to your PC using a USB cable and link the two devices using a controller from the Wii or Wii U.

• In your Windows search , enter “Windows Features Off or On.”
• Check the box next to “Windows Mobile Device Center.” Then restart your computer. Your computer is now ready to host the gamepad.
• Close the dialog ‘s window by Click “OK”.
• This option turns your gamepad into a standalone controller. This setup allows you to play on your Wii U with your laptop while connected to your gamepad.
• Now type Run into your computer’s search box.
• And then enter “\\ipconfig” into your browser. Enter the command. Find IPV4 in the next window that appears. You’d like to host the server for the gamepad on your PC. To put it another way, it will use “client mode” to connect to your device.
• Using the gamepad on your laptop would be possible if your computer hosts and syncs the device.
• Press the Enter button. Then click the Check button. On the following window, select Wi-Fi. Set the network to WPA-PSK. Type in a password for the connection. Now, you should be able to authenticate the Wii U gamepad using your PC.
• Locate IPV4 in your computer’s network connections. You should see a section labeled “IPv4,” and write down the address listed there. You’ll need this information later to place this file in your router’s IPV4 network.
• The gamepad’s server should already be set up like the other Wii U accessory you’ve synced to the computer.
• It will connect to your pad and sync the data. We’ll install the program called client mode.
• You’ll be able to use the gamepad to control certain features of your laptop’s OS and apps.

How to Use Laptop as a Display Monitor for Wii U Gaming Console

All we want to do is have fun and keep playing our favorite games.

Furthermore, if you own a Wii U system, you might know that it allows you to browse the Web, play media, and even browse apps in a convenient tablet-like interface.

A capture card is also required if you stream video from the PC to the Wii game console.

Using the television tuner card on the Wii or wii U console requires you to purchase the adapter.

Conclusion

Certain changes are required to connect your Wii U to your computer.

This is due to the hardware needed to connect the two.

There is an HDMI output port on the gamepad. Connect the laptop to an output port on the gamepad using the HDMI cable. Connect the cable to the HDMI port on the laptop.

So we’re left with using HDMI to connect the Wii U to a laptop with Windows or Linux.

If you want to play any games, you must make sure to connect the Wii U to the computer and television.