Do you own a Gateway laptop? If so, have you ever wondered how to remove the battery? Maybe you purchased a laptop from a friend, but want to learn how to do so yourself.
You’ve probably googled yourself to figure out the battery’s location, but it still isn’t there. When searching, you probably ran into a discrepancy.
Rather than opening up the laptop completely, which is not recommended, you can remove the battery from a gateway laptop by first removing the battery cover.
This cover is usually located on the side of the laptop on the lid and is held in place by four small Phillips screws.
Insert a Phillips screwdriver into the screw holes, and twist the little metal heads until they will all turn and loosen the cover. Then, simply remove the cover by pulling it outwards and away from the laptop.
Next, locate the battery. The battery is located on the back side of the laptop.
It is held in place by a ribbon on the bottom side of the laptop. The ribbon can be removed with some force.
After removing the ribbon, pull the battery out of the computer. If the battery does not come out easily, try applying pressure to the tip of the battery.
With practice, you can remove the battery with just one hand.
Why Do We Need to Remove Battery From Laptop?
Contents
When doing a hard reset or replacing internal components, you could potentially damage the laptop’s motherboard.
Apart from that, the battery can get damaged, which could make the laptop useless. Removing the battery is easy, and should take less than five minutes.
If you aren’t going to use the laptop for more that 3 days, you are better off with no battery on the laptop.
How to Remove Battery From Gateway Laptop
Lithium batteries are used in laptops, notebooks, and tablets because they store energy and are light weight.
Rechargeable lithium batteries offer a long battery life. Their packaging usually includes a safety carton.
The carton is also designed to protect the battery and to decrease the possibility that it will cause a fire. Here’s how you can remove the battery from your laptop: Remove the screw that is holding the grille to the computer.
Next, gently pry the grille away from the computer. Use the tip of a screwdriver if necessary.
Pull the battery from the computer. With the battery If you want to replace the battery in your gateway laptop, you first need to take it by the edge.
Using any other kind of battery could lead to irreparable damage to your gateway laptop and its contents.
Also Read: Laptop Power Light on But Nothing Happens?
How to install and remove the laptop battery
If you are using the battery pack for the first time, the charging process may take more time than usual.
If you are not using the gateway laptop for a long time, you must charge the battery with the charger.
In addition, when the battery runs out, you can replace it with a new one. The battery replacement is actually quite simple.
All you have to do is take out the old battery and replace it with the new one.
- The first step is to line up the charger with the laptop. The charger has an uneven shape and is designed so that it can be inserted into the laptop’s port. Before inserting the charger, make sure that it has power so that the laptop does not check into overload or shut down.
- Now is the time for the laptop battery to be recharged. Plug the charger into the port at the side of the computer. It takes about 4 hours to fully charge the Gateway laptop.
- Ensure that the battery ends are inserted first into the battery compartment. Press the battery firmly against the compartment until it becomes stuck. This will ensure that the battery becomes stuck and does not dislodge unintentionally.
- The battery should now snap into place.
- When you put the battery in, carefully push the battery against the surface until it becomes stuck and cannot be moved. The battery compartment has a compartment clip on the inside. Push the clip inward and the battery starts to be pushed in. When it’s pushed in, it will latch onto the compartment clip.
- That’s all there.
Conclusion
Finally, by following the methods above, you shouldn’t have any problems opening your Gateway laptop and removing its batteries.
If your laptop doesn’t have a battery lock button on or it doesn’t have an internal battery, you can pull the battery directly out of the laptop’s casing.
The battery must be removed with a pointed object because it could be dangerous.
It could result in large injuries or harm. Before operating your laptop, remove the battery and store it in a pouch to prevent it from being damaged.
If you are not a professional or an expert in removing Gateway laptop’s batteries, I’d suggest that you have them removed by a mechanic or an expert.
